DYMEC® Serial Links / Media Converters
-
DY-6077M
$675.00Industrial 8-Channel over a single fiber link, Multimode, 850nm, 2Km, ST Fiber Connectors. 8-Channel Serial to Fiber Link Media Converter. Comes with 8 – RJ-45 Serial cables & AC Adapter Supports RS-232 / RS-422 / RS-485. C Opto-Isolation. Sub-station & Switchgear Certified. Power: 5 ~ 12 Volts DC / AC Adapter Included
Overload Protection:Supported
Interface:P1J Coaxial Input
Temperature Hardened:YES
Power Input:5 ~ 12 Volts DC / AC Adapter Included
Transmission Distance:Multi-Mode / 1310nm / 2Km
Operating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
RS232 / RS-422 / RS-485
-
DY-6077S
$695.00Industrial 8-Channel over a single fiber link, Multimode, 1310nm, 20Km, ST Fiber Connectors. 8-Channel Serial to Fiber Link Media Converter. Comes with 8 – RJ-45 Serial cables & AC Adapter Supports RS-232 / RS-422 / RS-485. Opto-Isolation. Sub-station & Switchgear Certified. Power: 5 ~ 12 Volts DC / AC Adapter Included
Overload Protection:Supported
Interface:P1J Coaxial Input
Temperature Hardened:YES
Power Input:5 ~ 12 Volts DC / AC Adapter Included
Transmission Distance:Single Mode / 1310nm, 20Km, 40 Km /
1550nm, 60Km, 80KmOperating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
RS232 / RS-422 / RS-485
-
DY-ACC-CBL1
$29.00DB-9 Male (Molded Hood with Thumb Screws) to Tinned 9 Conductor Shielded / 3.1 Meter (10 Foot). Individually Packaged with Pinned Color Codes / Low Smoke Cable
- DB-9 to labeled tinned wires (GND / TX / RX )
-
DY-ACC-CBL1-PIN
$29.95DB-9 Male (Molded Hood with Thumb Screws) to Pinned 9 Conductor Shielded / 3.1 Meter (10 Foot). Individually Packaged with Pinned Color Codes / Low Smoke Cable
- DB-9 to labeled pinned wires (GND / TX / RX )
-
KY-DYMC37
$95.001-Port Mini RS232/RS485 Serial to Ethernet Server Power: AC 100~260 Volts / 50 ~60 Hz or DC 110 ~ 370 Volts to 12 Volts DC (5 Watt)
- One / 1 x 100 Mbps RJ-45 Ethernet electrical port and one / 1 x RS232 / RS485 serial network.
- Equipped with a 32-bit Arm Cortex-M7 core CPU, up to 400MHz frequency.
- External independent hardware watchdog design to prevent stoppages or slowdowns.
- Lightning protection provided on the Ethernet interface – up to 8KV.
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Industrial grade wide range – Low Power – DC power supply DC9 ~ 36V input.
- DYMEC Cyber-secure linkages
- Supports Windows / Linux COM/TTY drivers
- Serial Port – DB-9 or 5 Pin Terminal Block
- Ultra-low Voltage – small carbon footprint
- Supports Hardware Factory Settings Recovery
- Easy to use Web / Telnet Configuration
- Mini Size
- 1 RS232 / RS485 / 422 serial device networking server, DC9 ~ 36V wide voltage input
- KY-DYMC37 Kit comes complete with all cables and AC power supply if needed
- AC 100~260 Volts / 50 ~60 Hz or DC 110 ~ 370 Volts to 12 Volts DC (5 Watt)
