Description
Overview
Please contact sales@dymec.com for additional information.
DY-ACC-CBL1-PIN
$29.95
DB-9 Male (Molded Hood with Thumb Screws) to Pinned 9 Conductor Shielded / 3.1 Meter (10 Foot). Individually Packaged with Pinned Color Codes / Low Smoke Cable
- DB-9 to labeled pinned wires (GND / TX / RX )
Related products
-
DY-5546-S
$649.00Industrial Single Mode, Single-Channel, 1310nm, 20 Km, ST Fiber Connectors. Supports RS-232 / RS-422 / RS-485. Dual-Loop Self-Healing, Fully Redundant Ring, Industrial Serial to Optical Transceiver. Can also be used Point to Point. Includes DB-9 cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 36~72 Volts DC
- Supports fast ring network redundancy protection & functionality.
- PCM pulse code modulation technology combined with digital phase-locked loop clock extraction technology.
- Serial protection circuit, hot-swappable.
- Serial access node greater than 128.
- Smart electrical interface, no dial settings (Auto detect).
- Exact status indication, LED light alarm, for easy maintenance and troubleshooting.
- Rugged Design with full surge protection
- Certified for Power Station, Sub-station and Switchgear usage.
- 5 Year Warranty
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Power: 36~72 Volts DC
-
DY-5878M
$475.00Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Part Number: DY-5878M
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Multi-mode Fiber
- Wavelength: 850 nanometers (1310 Nanometers orderable)
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <2Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – 5 Pin Compression Terminal Block
- Standards: EIA RS232, RS485, RS422
- Interface type: 1*RS232/485/422
- Connection method: terminal block (7-position 3.81mm)
- RS232 signals: TX, RX, GND
- RS485/422 signals: T+(A+), T-(B-), R+, R-, GND
- Baud rate: 300bps~115200bps
- Node:RS-485 supports up to128 nodes
- Direction control: Automatically identifies RS-485 flow direction
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- 118mm × 35mm × 88mm (Length × height × width) (Metal din rail mounted)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
DY-5844M
$410.00Industrial multi-Mode, 1310 nm, 2 Km, ST Fiber Connectors, Serial to Fiber Link Media Converter, Din Rail. Supports RS-232 / RS-422 / RS-485. Includes AC Adapter and DB-9 Cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC
- Part Number: DY-5844M
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Multi-mode Fiber
- Wavelength: 850 nanometers (1310 Nanometers orderable)
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <2Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Power Input: 9~30 Volts DC
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Original DYMEC Replacement Part
-
DY-6077S
$695.00Industrial 8-Channel over a single fiber link, Multimode, 1310nm, 20Km, ST Fiber Connectors. 8-Channel Serial to Fiber Link Media Converter. Comes with 8 – RJ-45 Serial cables & AC Adapter Supports RS-232 / RS-422 / RS-485. Opto-Isolation. Sub-station & Switchgear Certified. Power: 5 ~ 12 Volts DC / AC Adapter Included
Overload Protection:Supported
Interface:P1J Coaxial Input
Temperature Hardened:YES
Power Input:5 ~ 12 Volts DC / AC Adapter Included
Transmission Distance:Single Mode / 1310nm, 20Km, 40 Km /
1550nm, 60Km, 80KmOperating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
RS232 / RS-422 / RS-485
