DYMEC’s Layer 2 &3 ITS Managed switches are designed to be installed in a traffic cabinet input file rack. The 3170-line features industrial-grade reliability, network redundancy, and security features based on the IEC 62443 standard. The DYMEC 3170 lines comes in a layer 2 or Layer 3 switch. The line supports IEEE802.3bt (60 Watts) and up to 10GbE fiber optic slots with ERPSv2 Non-stop self-healing fiber rings. We offer toughened, industry-specific products with multiple industry certifications, such as parts of the EN 50155 standard for rail applications, IEC 61850-3 for power automation systems, and NEMA TS2 for intelligent transportation systems. Our security features are based on the IEC 62443 standards. NSA Endpoint Secure with Secure Chassis.   5 Year Warranty.

DYMEC ITS, Automation and Infrastructure switches are built using the highest performance Broadcom System on a Chip hardware. We offer the best performance, longest life hardware in the industry. Our switches out-perform all others in terms of performance, features and security.The DYMEC 3170TM Switch line has both Layer 2 switching and Layer 3 routing for a complete network solution.

NSA Certified.
Dymec 3170 SERIES HIGHLIGHTS
NSA Secure
Premier NSA Security for Endpoint Access Devices. Certified Secure Console & Chassis. Console Port and Chassis can be shut down & secured (Patent Pending)

Broadcom SOC
Equipped with Broadcom chip: Broadcom provides performance and security for ITS infrastructure.
Secure Networking – Highest throughput.

Layer 2 / Layer 3
Designed for 10G/100G and 25G/100G. Advanced ITS Architecture used to support autonomous vehicles and smart information highways and infrastructure.

Temp Hardened
Industrial strength temperature hardened for longevity and safety. -40~+85 degrees centigrade

Surge Protected
All ports and power inputs are fully surge protected against power spikes and electrostatic discharge. Broadcom power saving chipsets.

IGMP Storm
Advanced features such as UPnP, IGMP Snooping, Storm Control, VLAN QinQ, LLDP, DHCP SErver & Client, Event Warning, Port Mirroring, 802.1x, Modbus/TCP, Ethernet/IP, IPv4, IPv6, SNMP, USB Configuration, Multi-Cast
FUNCTIONAL CAPABILITIES
1. Network Redundancy – RSTP, MSTP, G.8032 ERPSv2, Port Trunking with LACP.
2. Security – IEEE802.1X, RADIUS, TACACS+, SSL, SSH
3. Management – Ipv4, IPv6, Web, Telnet, Serial Console, CLI, SNMP v1/v2/v3, uPNP.
4. Diagnostics – RMON, SNMP Inform/Trap, Syslog, SMTP, Port Mirroring, LLDP.
5. Configuration – DHCP Server/Client, Relay Option 82, TFTP, SFTP, USB
6. Filtering – 802.1Q VLAN, Qin Q, IGMP, Snooping v1/v2/v3, IGMP Querier, Independent VLAN Learning.
7. Time Synchronization – Network Time Protocol (NTP)
8. QOS – CoS, DSCP, WRR/SPQ Queueing, Storm Protection, Broadcast Control
9. Cable Diagnostics – full twisted pair diagnostics, showing cable length, shorts, and condition of connection
10. SFP Diagnostics- full SFP diagnostic support in compliance with MSA manufacturing standards, showing power, strength, and temperature, full DDMI capability
11. Automatic Notification of Alarms – settable and user definable.
12. Storage – USB storage for firmware updates, configuration backup, restore, boot up and syslog.
13. Built-in Traffic Analysis – per port, and per trunk, user selectable.
14. Automatic Multi-node Software Upgrade – automatic software upgrades, configuration distribution for multiple nodes across the network.
15. MAC Table Support – used for troubleshooting system loops in the network. Shows MAC addresses and the port they are learned from.
16. IPv6 Neighbor Table – identifies IPv6 entries in the network
17. IEEE 802.1Q VLAN Table – identifies VLAN’s and associated ports
18. LLDP Neighbor Table – identifies mac addresses on ports (IPv4)
19. IGMP Snooping Table – shows which links need which IP multicast transmissions
20. Port Status – condition of port, errors & activity
21. RSTP Port Status – identifies port state & role in RSTP (Rapid Spanning Tree)
22. IPv4 – Supports IPv4 Protocol
23. IPv6 – Supports IPv6 Protocol (Includes IPv6 Neighbor Table)
24. G.8032 ERPSv2 – Supports up to 3 rings per device)
25. Management VLAN Table – GUI Changeable management VLAN
26. Q-in-Q Port Settings – Service Provider Designation VLLAN
27. Storm Control Traffic Settings – User definable port limits
28. Access Control List (ACL) – definable packet action & activity
29. PING Support – test reachability of a device from the switch
30. Device Authorization – User definable
31. USB – Storage Support
32. SFTP – SFTP File Support
33. Firmware Upgrade Wget – Supports Apache – HTTP Server
34. Firmware Upgrade USB – Supports USB Upgrade