RS485 / - 1 Serial x 1 Fiber

• 

  DY-5844M

  Industrial multi-Mode, 1310 nm, 2 Km, ST Fiber Connectors, Serial to Fiber Link Media Converter, Din Rail. Supports RS-232 / RS-422 / RS-485. Includes AC Adapter and DB-9 Cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC

  • Part Number: DY-5844M
  • Category Type – Un-Managed
  • Serial Protocols Supported: RS-232, RS-422, RS-485
  • Fiber Type: Multi-mode Fiber
  • Wavelength: 850 nanometers (1310 Nanometers orderable)
  • Fiber Diameter: 62.5um (micron) or 50um
  • Fiber Distance: <2Km
  • Fiber Connector: ST (LC, FC or SC orderable)
  • Dual Redundant Power Inputs
  • Industrial Wide Range Power Supply – Surge Protected
  • Power Input: 9~30 Volts DC
  • Overload Protected
  • Lightning Protection
  • Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
  • Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
  • RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
  • Serial Port – DB-9 or 5 Pin Terminal Block
  • Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
    • DB-9 -Female connector to Data Block)
  • Automatic Signal Flow Identification
  • Automatic Baud Rate Adaptation
  • Military Grade Casing: Aluminum
  • LED Indicator Lights: 4
    • 2 x Power Input
    • 1 x Receive
    • 1 x Transmit
  • Din-Rail or Shelf Mount (includes Din-Rail Mount)
  • 25 KV Antistatic Protection
  • Includes Free AC power cord
  • Mini-Size – 108mm x 34mm x 126mm)
  • Certified for Power & Sub-station Use
  • Certified for Switchgear Use
  • Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
  • 5 Year Warranty / Limited Lifetime
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems
  • Original DYMEC Replacement Part

  

  $410.00
• 

  DY-5844MA-ST

  Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors, Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes DB-9 Cable and AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 5~36 Volts DC

  • RS-232/RS-422/RS-485 interfaces
  • Small Form Factor – Reduced footprint size
  • Complete Kit – includes converter, AC power supply if needed, and DB-9 Cable
  • ST Fiber Connectors
  • Opto Isolation
  • Lightning Protection
  • Signal flow is automatically identified and transparently transmitted
  • High gain optical transceiver module to ensure the transmission distance and quality
  • The baud rate automatically adapts without changing the user protocol.
  • Industrial design, all surface mount technology, extended MTBF
  • 850nm – fiber optic frequency
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems
  • Power: 5~36 Volts DC

  

  $440.00
• 

  DY-5844S

  Industrial Single-Mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes DB-9 Cable and AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC

  • Part Number: DY-5844S
  • Category Type – Un-Managed
  • Serial Protocols Supported: RS-232, RS-422, RS-485
  • Fiber Type: Single-mode Fiber
  • Wavelength: 1310 nanometers (1550 Nanometers orderable)
  • Fiber Diameter: 9/125um (micron)
  • Fiber Distance: <20Km (40, 60, 0r 80 KM orderable)
  • Fiber Connector: ST (LC, FC or SC orderable)
  • Power Input: 9~30 Volts DC
  • Dual Redundant Power Inputs
  • Industrial Wide Range Power Supply – Surge Protected
    • Overload Protected
    • Lightning Protection
  • Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
  • Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
  • RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
  • Serial Port – DB-9 or 5 Pin Terminal Block
  • Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
    • DB-9 -Female connector to Data Block)
  • Automatic Signal Flow Identification
  • Automatic Baud Rate Adaptation
  • Military Grade Casing: Aluminum
  • LED Indicator Lights: 4
    • 2 x Power Input
    • 1 x Receive
    • 1 x Transmit
  • Din-Rail or Shelf Mount (includes Din-Rail Mount)
  • 25 KV Antistatic Protection
  • Includes Free AC power cord
  • Mini-Size – 108mm x 34mm x 126mm)
  • Certified for Power & Sub-station Use
  • Certified for Switchgear Use
  • Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
  • 5 Year Warranty / Limited Lifetime
  • Original DYMEC Replacement Part
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems

  

  $399.00
• 

  DY-5877M

  Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Includes AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC

  • Part Number: DY-5877M
  • Category Type – Un-Managed
  • Serial Protocols Supported: RS-232, RS-422, RS-485
  • Fiber Type: Multi-mode Fiber
  • Wavelength: 850 nanometers (1310 Nanometers orderable)
  • Fiber Diameter: 62.5um (micron) or 50um
  • Fiber Distance: <2Km
  • Fiber Connector: ST (LC, FC or SC orderable)
  • Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
  • Dual Redundant Power Inputs
  • Industrial Wide Range Power Supply – Surge Protected
    • Overload Protected
    • Lightning Protection
  • Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
  • Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
  • RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
  • Serial Port – DB-9 or 5 Pin Terminal Block
  • Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
    • DB-9 -Female connector to Data Block)
  • Automatic Signal Flow Identification
  • Automatic Baud Rate Adaptation
  • Military Grade Casing: Aluminum
  • LED Indicator Lights: 4
    • 2 x Power Input
    • 1 x Receive
    • 1 x Transmit
  • Din-Rail or Shelf Mount (includes Din-Rail Mount)
  • 25 KV Antistatic Protection
  • Includes Free AC power cord
  • Mini-Size – 108mm x 34mm x 126mm)
  • Certified for Power & Sub-station Use
  • Certified for Switchgear Use
  • Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
  • 5 Year Warranty / Limited Lifetime
  • Original DYMEC Replacement Part
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems
  • *1310nm version available for Wind Turbine / Very Cold Applications

  

  $465.00
• 

  DY-5877S

  Industrial Single-Mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC

  • Part Number: DY-5877S
  • Category Type – Un-Managed
  • Serial Protocols Supported: RS-232, RS-422, RS-485
  • Fiber Type: Single-mode Fiber
  • Wavelength: 1310 nanometers (1550 Nanometers orderable)
  • Fiber Diameter: 9/125um (micron)
  • Fiber Distance: <20Km (40, 60, 0r 80 KM orderable)
  • Fiber Connector: ST (LC, FC or SC orderable)
  • Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
  • Dual Redundant Power Inputs
  • Industrial Wide Range Power Supply – Surge Protected
    • Overload Protected
    • Lightning Protection
  • Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
  • Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
  • RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
  • Serial Port – DB-9 or 5 Pin Terminal Block
  • Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
    • DB-9 -Female connector to Data Block)
  • Automatic Signal Flow Identification
  • Automatic Baud Rate Adaptation
  • Military Grade Casing: Aluminum
  • LED Indicator Lights: 4
    • 2 x Power Input
    • 1 x Receive
    • 1 x Transmit
  • Din-Rail or Shelf Mount (includes Din-Rail Mount)
  • 25 KV Antistatic Protection
  • Includes Free AC power cord
  • Mini-Size – 108mm x 34mm x 126mm)
  • Certified for Power & Sub-station Use
  • Certified for Switchgear Use
  • Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
  • 5 Year Warranty / Limited Lifetime
  • Original DYMEC Replacement Part
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems

  

  $490.00
• 

  DY-5878M

  Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)

  • Part Number: DY-5878M
  • Category Type – Un-Managed
  • Serial Protocols Supported: RS-232, RS-422, RS-485
  • Fiber Type: Multi-mode Fiber
  • Wavelength: 850 nanometers (1310 Nanometers orderable)
  • Fiber Diameter: 62.5um (micron) or 50um
  • Fiber Distance: <2Km
  • Fiber Connector: ST (LC, FC or SC orderable)
  • Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
  • Dual Redundant Power Inputs
  • Industrial Wide Range Power Supply – Surge Protected
    • Overload Protected
    • Lightning Protection
  • Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
  • Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
  • RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
  • Serial Port – DB-9 or 5 Pin Terminal Block
  • Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
    • DB-9 -Female connector to Data Block)
  • Automatic Signal Flow Identification
  • Automatic Baud Rate Adaptation
  • Military Grade Casing: Aluminum
  • LED Indicator Lights: 4
    • 2 x Power Input
    • 1 x Receive
    • 1 x Transmit
  • Din-Rail or Shelf Mount (includes Din-Rail Mount)
  • 25 KV Antistatic Protection
  • Includes Free AC power cord
  • Mini-Size – 108mm x 34mm x 126mm)
  • Certified for Power & Sub-station Use
  • Certified for Switchgear Use
  • Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
  • 5 Year Warranty / Limited Lifetime
  • Original DYMEC Replacement Part
  • CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
  • UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
  • IEEE 61850-3 Used in Electrical Substations & Distribution
  • IEEE 1613 Used in Electrical Substations & Distribution
  • EN50155 Used in Railway & Transportation
  • EN50121-4 Used in Railway & Transportation
  • NEMA TS-2 – Used in Traffic Signal Control Systems

  

  $475.00
• 

  DY-IRS93-SFP

  Industrial Single Fiber Serial Link – Supports RS-232 / RS-485 / RS-422 (Fiber Optic Modem, SFP Optional) Supports multi-mode or single mode fiber. Also works with Bidirectional (BiDi)SFP’s over a single fiber. Small Form Factor. Power: 12 ~ 48 Volts DC

  • Plug-and-play, hot pluggable
  • DYMEC Warranty
  • Extends Bi-directional RS-232/RS-485/RS-422 up to 2KM on MMF, 100 KM on SMF
  • EIA /TIA standard RS232/485/422, 0~2Mbps rate
  • Serial data is fully transparent, baud rate is self-adaptive, no setting is required
  • The high-speed serial data can also be used for DMX512 communication in Stage Lighting Control
  • Supports DIN-Rail & Wall-mount installation.
  • Power: 12 ~ 48 Volts DC

  

  $370.00