Description
Overview
Please contact sales@dymec.com for additional information.
DY-ACC-CBL1
$29.00
DB-9 Male (Molded Hood with Thumb Screws) to Tinned 9 Conductor Shielded / 3.1 Meter (10 Foot). Individually Packaged with Pinned Color Codes / Low Smoke Cable
- DB-9 to labeled tinned wires (GND / TX / RX )
Related products
-
DY-5977M
$595.00Industrial 4-Channel over a single fiber link, Multimode, 850nm, 2Km, ST Fiber Connectors. 4-Channel Serial to Fiber Link Media Converter. Comes with 4 – RJ-45 Serial cables & AC Adapter Supports RS-232 / RS-422 / RS-485. C Opto-Isolation. Sub-station & Switchgear Certified. Power: 5 ~ 12 Volts DC / AC Adapter Included
Category Type:Un- Managed
Power Over Ethernet:NA
Fiber Type/Wavelength/Fiber Diameter:Multi-Mode / 1310nm / 62.5 or 50um
Fiber Trans Distance:<5 Kilometers
Max Number of Ports:5
Gigabit Ethernet Ports:NA
Fast Ethernet Ports:NA
100/1000Tx SFP Ports:NA
1000Tx SFP Ports:NA
1G/10G SFP+ Ports:NA
Fixed Fiber Ports:1 x FC (SC / ST Optional)
PoE Ports:NA
Combo Ports:NA
Power: 5 ~ 12 Volts DC / AC Adapter Included
Temperature Hardened:YES
Operating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
RS232 / RS-422 / RS-2485
Multimode
-
KY-DYMC37
$95.001-Port Mini RS232/RS485 Serial to Ethernet Server Power: AC 100~260 Volts / 50 ~60 Hz or DC 110 ~ 370 Volts to 12 Volts DC (5 Watt)
- One / 1 x 100 Mbps RJ-45 Ethernet electrical port and one / 1 x RS232 / RS485 serial network.
- Equipped with a 32-bit Arm Cortex-M7 core CPU, up to 400MHz frequency.
- External independent hardware watchdog design to prevent stoppages or slowdowns.
- Lightning protection provided on the Ethernet interface – up to 8KV.
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Industrial grade wide range – Low Power – DC power supply DC9 ~ 36V input.
- DYMEC Cyber-secure linkages
- Supports Windows / Linux COM/TTY drivers
- Serial Port – DB-9 or 5 Pin Terminal Block
- Ultra-low Voltage – small carbon footprint
- Supports Hardware Factory Settings Recovery
- Easy to use Web / Telnet Configuration
- Mini Size
- 1 RS232 / RS485 / 422 serial device networking server, DC9 ~ 36V wide voltage input
- KY-DYMC37 Kit comes complete with all cables and AC power supply if needed
- AC 100~260 Volts / 50 ~60 Hz or DC 110 ~ 370 Volts to 12 Volts DC (5 Watt)
-
DY-5844S
$399.00Industrial Single-Mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes DB-9 Cable and AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC
- Part Number: DY-5844S
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Single-mode Fiber
- Wavelength: 1310 nanometers (1550 Nanometers orderable)
- Fiber Diameter: 9/125um (micron)
- Fiber Distance: <20Km (40, 60, 0r 80 KM orderable)
- Fiber Connector: ST (LC, FC or SC orderable)
- Power Input: 9~30 Volts DC
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
KY-3170iX
Call for PriceITS 16 Port 1GbE Switch
*No Loose Connections
*Protected Against Corrosion
Category Type:Managed Layer 2 Ethernet
Mounting Type:ITS Input File / Rack Mount
NEMA Cabinet:YES
Non-NEMA Cabinet:YES
PoE:Non-PoE
Max Number of Ports:16
1000 Mbps BaseX SFP Ports:2
10/100/1000 TX Ports:14
Network Chipset Mfr:Broadcom SoC
Power Input:12~48 Volts DC (rear)
Fiber (SFP) DDMI Diagnostic Support:YES
Copper Port Diagnostics:YES
NSA Endpoint Security Certified:YES
Temperature Hardened:YES
TAA Compliant:TAA Certified
Operating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
