no-coupon
-
DY-3457-2F-2TX/LV-ST/MM
$249.00Multi-Mode, Electrical Substation 10/100 Mbps Ethernet Electrical to Optical Media Converter / Opto-Isolation. No Dip Switches to set. Sub-station & Switchgear Certified. Power: 9~60 Volts DC, 85~264 Volts AC / 110 ~ 370 Volts DC
- 2 x 100Mbps FX Ports
- 2 x 10/100Mbps RJ-45 Ports
- Genuine DYMEC
- Substation Certified
- Ethernet Extension
- DC Isolation
- Error Free Transmission
- Smaller Footprint
- Improved Fiber Optics
- Power: 9~60 Volts DC, 85~264 Volts AC / 110 ~ 370 Volts DC
-
DY-5016 Optical Star
Call for PriceVersatile 16-Port Hub and Spoke Topology, Supports Multiple Serial Protocols, Ideal for Extended Range, Interference-Free Network Design
Features & Benefits
- 16 X Port Fiber Optic Serial Stars enables the networking of Multiple Serial Devices
- Low Cost per Port – Easily Scales
- PORTS: 1 X RS-232 Serial Port (DB9 – Female) & 1 X RS-422 / RS-485 Serial Port ( Compression 5 Pin) and 16 X Optical Ports
- Temperature Hardened – -40C ~ 85C
- No DIP Switches to set
- Built-In Auto-Protocol Detect – RS-232 / RS-485 / RS-422
- Built-In Auto-Baud Detect
- Optical Serial Stars allow any Intelligent Electronic Device (IED) to de-energize without affecting the remainder of the network
- Built-In Serial Intelligence – automatically identifies RS-485 signal flow direction
- Support for 1 Master and multiple slaves communication mode
- RS-485 supports up to 128 Nodes
- Supports transparent transmission, baud rate adaptive – 300bps ~ 115200bps
- Various Fiber Distances: 2KM / 5KM / 10KM / 20KM / 40KM / 60KM / 80KM / 120KM
- Available Fiber Wavelengths – 850nm / 1310nm / 1550nm
- Transmission Distance Up To 120Km
- 16 X ST Fiber Ports
- Single mode or Multi-mode Fiber
- RS-232 DB-9 (Female), Serial Port
- Fan-less (Convection Cooled)
- AC or DC Powered
- Supports AC 85~ 264 Volts / DC 110 ~ 370 Volts (Power Input)
- Supports DC 18 ~ 72 Volts (Power Input)
- Power Consumption: <1.5W@DC48 Volts / <1.5W@AC220 Volts
- Overload Protection
- 15 Kv Anti-static
- 600 W / ms Anti-lightning Strike
- Provides Opto-isolation
- Chassis Ground
- Aluminum housing – light weight
- Ingress Protection – IP40
- 19″ Rack Mount or Shelf Mount
- 1 RU
- Garrettcom OS9 & OS5 (Optical Star) Exact Replacement
-
DY-5545C-M
$599.00Multi-Mode, Single-Channel, 1310nm, 2 Km, ST Fiber Connectors. Supports RS-232 / RS-422 / RS-485. Dual-Loop Self-Healing, Fully Redundant Ring, Industrial Serial to Optical Transceiver. Can also be used Point to Point. Includes DB-9 cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 36~72 Volts DC
- Supports fast ring network redundancy protection & functionality.
- PCM pulse code modulation technology combined with digital phase-locked loop clock extraction technology.
- Serial protection circuit, hot-swappable.
- Serial access node greater than 128.
- Smart electrical interface, no dial settings (Auto detect).
- Exact status indication, LED light alarm, for easy maintenance and troubleshooting.
- Rugged Design with full surge protection
- Certified for Power Station, Sub-station and Switchgear usage.
- 5 Year Warranty
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Power: 36~72 Volts DC
-
DY-5546-S
$649.00Industrial Single Mode, Single-Channel, 1310nm, 20 Km, ST Fiber Connectors. Supports RS-232 / RS-422 / RS-485. Dual-Loop Self-Healing, Fully Redundant Ring, Industrial Serial to Optical Transceiver. Can also be used Point to Point. Includes DB-9 cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 36~72 Volts DC
- Supports fast ring network redundancy protection & functionality.
- PCM pulse code modulation technology combined with digital phase-locked loop clock extraction technology.
- Serial protection circuit, hot-swappable.
- Serial access node greater than 128.
- Smart electrical interface, no dial settings (Auto detect).
- Exact status indication, LED light alarm, for easy maintenance and troubleshooting.
- Rugged Design with full surge protection
- Certified for Power Station, Sub-station and Switchgear usage.
- 5 Year Warranty
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Power: 36~72 Volts DC
-
DY-5844M
$410.00Industrial multi-Mode, 1310 nm, 2 Km, ST Fiber Connectors, Serial to Fiber Link Media Converter, Din Rail. Supports RS-232 / RS-422 / RS-485. Includes AC Adapter and DB-9 Cable. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC
- Part Number: DY-5844M
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Multi-mode Fiber
- Wavelength: 850 nanometers (1310 Nanometers orderable)
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <2Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Power Input: 9~30 Volts DC
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Original DYMEC Replacement Part
-
DY-5844MA-ST
$440.00Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors, Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes DB-9 Cable and AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 5~36 Volts DC
- RS-232/RS-422/RS-485 interfaces
- Small Form Factor – Reduced footprint size
- Complete Kit – includes converter, AC power supply if needed, and DB-9 Cable
- ST Fiber Connectors
- Opto Isolation
- Lightning Protection
- Signal flow is automatically identified and transparently transmitted
- High gain optical transceiver module to ensure the transmission distance and quality
- The baud rate automatically adapts without changing the user protocol.
- Industrial design, all surface mount technology, extended MTBF
- 850nm – fiber optic frequency
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- Power: 5~36 Volts DC
-
DY-5844S
$399.00Industrial Single-Mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes DB-9 Cable and AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~30 Volts DC
- Part Number: DY-5844S
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Single-mode Fiber
- Wavelength: 1310 nanometers (1550 Nanometers orderable)
- Fiber Diameter: 9/125um (micron)
- Fiber Distance: <20Km (40, 60, 0r 80 KM orderable)
- Fiber Connector: ST (LC, FC or SC orderable)
- Power Input: 9~30 Volts DC
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
DY-5877M
$465.00Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Includes AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
- Part Number: DY-5877M
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Multi-mode Fiber
- Wavelength: 850 nanometers (1310 Nanometers orderable)
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <2Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – 5 Pin Compression Terminal Block
- Standards: EIA RS232, RS485, RS422
- Interface type: 1*RS232/485/422
- Connection method: terminal block (7-position 3.81mm)
- RS232 signals: TX, RX, GND
- RS485/422 signals: T+(A+), T-(B-), R+, R-, GND
- Baud rate: 300bps~115200bps
- Node:RS-485 supports up to128 nodes
- Direction control: Automatically identifies RS-485 flow direction
- Includes Free DB-9 cable
- DB-9 Cable – Female connector to Compression Pinned Data Block
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- 110mm × 26mm × 72mm (Length × height × width) (Metal din rail mounted)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
- *1310nm version available for Wind Turbine / Very Cold Applications
-
DY-5877S
$490.00Industrial Single-Mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-485. Includes AC Adapter. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
- Part Number: DY-5877S
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Single-mode Fiber
- Wavelength: 1310 nanometers (1550 Nanometers orderable)
- Fiber Diameter: 9/125um (micron)
- Fiber Distance: <20Km (40, 60, 0r 80 KM orderable)
- Fiber Connector: ST (LC, FC or SC orderable)
- Power: 110 ~ 370 Volts DC / 85 ~ 264 Volts AC
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
DY-5878M
$475.00Industrial multi-mode, 850nm, 2Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Part Number: DY-5878M
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Multi-mode Fiber
- Wavelength: 850 nanometers (1310 Nanometers orderable)
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <2Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – 5 Pin Compression Terminal Block
- Standards: EIA RS232, RS485, RS422
- Interface type: 1*RS232/485/422
- Connection method: terminal block (7-position 3.81mm)
- RS232 signals: TX, RX, GND
- RS485/422 signals: T+(A+), T-(B-), R+, R-, GND
- Baud rate: 300bps~115200bps
- Node:RS-485 supports up to128 nodes
- Direction control: Automatically identifies RS-485 flow direction
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- 118mm × 35mm × 88mm (Length × height × width) (Metal din rail mounted)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
DY-5878S
$490.00Industrial single-mode, 1310nm, 20Km, ST Fiber Connectors. Serial to Fiber Link Media Converter. Supports RS-232 / RS-422 / RS-48. Plug & Play – No Dip Switches to set. Opto-Isolation. Sub-station & Switchgear Certified. Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Part Number: DY-5878S
- Category Type – Un-Managed
- Serial Protocols Supported: RS-232, RS-422, RS-485
- Fiber Type: Single-mode Fiber
- Wavelength: 1310 nanometers
- Fiber Diameter: 62.5um (micron) or 50um
- Fiber Distance: <20Km
- Fiber Connector: ST (LC, FC or SC orderable)
- Power: 9~60 Volts DC (Supports 12 / 24 / 48 Volt Plant)
- Dual Redundant Power Inputs
- Industrial Wide Range Power Supply – Surge Protected
- Overload Protected
- Lightning Protection
- Temperature Hardened: -40°C ~ 85°C (-40°F ~ 185°F)
- Ultra-Low Power Consumption: <1 Watt (Small Carbon Footprint)
- RS-232 / RS-485 / RS-422 interface equipped up to 15KV surge protection.
- Serial Port – DB-9 or 5 Pin Terminal Block
- Includes Free DB-9 cable (DYMEC KY-ACC-CBL1)
- DB-9 -Female connector to Data Block)
- Automatic Signal Flow Identification
- Automatic Baud Rate Adaptation
- Military Grade Casing: Aluminum
- LED Indicator Lights: 4
- 2 x Power Input
- 1 x Receive
- 1 x Transmit
- Din-Rail or Shelf Mount (includes Din-Rail Mount)
- 25 KV Antistatic Protection
- Includes Free AC power cord
- Mini-Size – 108mm x 34mm x 126mm)
- Certified for Power & Sub-station Use
- Certified for Switchgear Use
- Certifications: UL, CE, FCC, IEC, ITUT, NEMA TS-2
- 5 Year Warranty / Limited Lifetime
- Original DYMEC Replacement Part
- CE, FCC, UL, NEMA TS2 / IEEE1613 / IEC61000-6-5 (IEC61850-3)
- UL, CE, FCC, IEEE, IEC, ITUT, NEMA, Substation & Digital Substation, Switchgear
- IEEE 61850-3 Used in Electrical Substations & Distribution
- IEEE 1613 Used in Electrical Substations & Distribution
- EN50155 Used in Railway & Transportation
- EN50121-4 Used in Railway & Transportation
- NEMA TS-2 – Used in Traffic Signal Control Systems
-
DY-5977M
$595.00Industrial 4-Channel over a single fiber link, Multimode, 850nm, 2Km, ST Fiber Connectors. 4-Channel Serial to Fiber Link Media Converter. Comes with 4 – RJ-45 Serial cables & AC Adapter Supports RS-232 / RS-422 / RS-485. C Opto-Isolation. Sub-station & Switchgear Certified. Power: 5 ~ 12 Volts DC / AC Adapter Included
Category Type:Un- Managed
Power Over Ethernet:NA
Fiber Type/Wavelength/Fiber Diameter:Multi-Mode / 1310nm / 62.5 or 50um
Fiber Trans Distance:<5 Kilometers
Max Number of Ports:5
Gigabit Ethernet Ports:NA
Fast Ethernet Ports:NA
100/1000Tx SFP Ports:NA
1000Tx SFP Ports:NA
1G/10G SFP+ Ports:NA
Fixed Fiber Ports:1 x FC (SC / ST Optional)
PoE Ports:NA
Combo Ports:NA
Power: 5 ~ 12 Volts DC / AC Adapter Included
Temperature Hardened:YES
Operating Temperature:Ext:-40°C ~ 85°C (-40°F ~ 185°F)
DYMEC Warranty:5 Year / Limited Lifetime
RS232 / RS-422 / RS-2485
Multimode
